top of page

80mm Spindle

This is a CNC Dust shoe to fit a 80mm spindle, with various outlet sizes

The standard shoe is black but this is not guaranteed, It consists of the top, base and 52mm OA brush the two halves hold together with magnets, and to the spindle with a jubilee clip.

The shoe is designed to slide up and down on the body of the spindle to set the brush to the correct height.

 If you can't get the height you need with the standard brush  it's easy enough to cut to the required length. There is a clip on how to cut the brush on:

I can supply this with a 67mm OA brush if the 52mm OA isn't long enough or 2 bases with one of each brush fitted and one top. 

Alternatively I make spacers to fit between the top and bottom half of the shoe which also fit together with magnets.

While I'm setting this site up you'll need to Contact me for the cost of anything that's not included with a standard shoe.

The extraction fitting size is external diameter, to fit the internal diameter on your hose.

If you need a different size let me know and I'll make it, there will be lead time.

80 to 100.jpg
80 to 100 (1).jpg
80 to 100, 20mm spacer 2no 67mm brush (2
80 to 100, 20mm spacer 2no 67mm brush (1
80 to 100, 20mm spacer 2no 67mm brush (3
80 to 100 + spacer.jpg

While I try to post within 2 to 3 days this is not all ways possible, there may be lead time on certain items.

dewalt to 63 (1).jpg
bottom of page